Drive specifications summary – Seagate BARRACUDA ES SERIAL ATA ST3750640NS User Manual
Page 14
8
Barracuda ES Serial ATA Product Manual, Rev. D
Table 3:
Drive specifications summary
for 400 Gbyte models
Drive specification
ST3400620NS
ST3400820NS
Formatted Gbytes (512 bytes/sector)*
400
Guaranteed sectors
781,422,768
Heads
5
Discs
3
Bytes per sector
512
Default sectors per track
63
Default read/write heads
16
Default cylinders
16,383
Recording density, KBPI (kbits/in max)
781
Track density, KTPI (ktracks/in avg.)
145
Areal density, (Gbits/in
2
avg)
128.2
Spindle speed (RPM)
7,200
Internal data transfer rate (Mbits/sec max)
1,030
Sustained data transfer rate OD (Mbytes/sec max)
72
I/O data-transfer rate (Mbytes/sec max)
300
ATA data-transfer modes supported
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
Cache buffer
16 Mbytes
8 Mbytes
Height (mm max)
26.1 mm (1.028 inches)
Width (mm max)
101.6 mm (4.000 inches) +/- 0.010 inches
Length (mm max)
146.99 mm (5.787 inches)
Weight (max)
635 grams
Average latency (msec)
4.16
Power-on to ready (sec max)
15 sec
Standby to ready (sec max)
15 sec
Track-to-track seek time (msec typical)
<0.8 (read)
<1.0 (write)
Average seek, read (msec typical)
<8.5
Average seek, write (msec typical)
<10.0
Startup current (typical) 12V (peak)
2.8 amps
Voltage tolerance (including noise)
5V ± 5%
12V ± 10%
Ambient temperature
5° to 55°C (operating)
–40° to 70°C (nonoperating)
Temperature gradient (°C per hour max)
20°C (operating)
30°C (nonoperating)
Relative humidity
5% to 90% (operating)
5% to 95% (nonoperating)
Relative humidity gradient
30% per hour max
Wet bulb temperature (°C max)
37.7 (operating)
37.7 (nonoperating)
Altitude, operating
–60.96 m to 3,048 m
(–200 ft. to 10,000+ ft.)
Altitude, nonoperating
(below mean sea level, max)
–60.96 m to 12,192 m
(–200 ft. to 40,000+ ft.)
Operational Shock (max at 2 msec)
63 Gs
Non-Operational Shock (max at 2 msec)
300 Gs