Sharp AJ-2200 - Manual (Page 50)

48
APPENDIX
This chapter shows specifications of the printer, supplies, and how to store the supplies.
SPECIFICATIONS OF THE PRINTER
*1
When printing SHARP original data with draft mode.
*2
For the Bypass Tray, the maximum paper size is 5-sheeted A4/8.5"x11" banner.
*3
Holds up to total thickness of 15mm paper stack.
*4
Holds up to total thickness of 5mm paper stack.
*5
With 75g/m
2
(20lbs.) plain paper.
*6
When using 20.3cm x 25.4cm (8"x 10") size paper at 5% image area in normal usage.
*7
For this printer's power supply requirement, see the name plate located on the back of the printer.
Name AJ-2200
Type On demand, thermal inkjet type
Resolution Max. 2400dpi x 1200dpi
Printing speed
*1
Monochrome 17.0ppm
Colour 10.0ppm
Paper
Width Max. 215.9mm (8.5") Min. 76.2mm (3")
Length
*2 Max. 355.6mm (14") Min. 127mm (5")
Void area
Min. Top 3mm, Bottom 3mm, Left 3mm, Right 3mm
Recommendation Top 19mm, Bottom 19mm, Left 10mm, Right 10mm
Print description language Host based printing system
Interface
IEEE1284-compliant bi-directional parallel interface
USB interface (B type)
Paper tray
capacity
Paper tray
*3
Max. 150 sheets of plain paper
*5
Output tray
*4
Max. 50 sheets of plain paper
*5
Bypass tray 1 sheet
Ink life
*6
Black 400 sheets (700 sheets with the optional AJ-T20B)
Colour 350 sheets
External dimensions (W x D x H) 476mm x 374mm x 191mm (18.7" x 14.7" x 7.5")
Weight 6.15kg (13.5lbs.)
Power supply
*7 Local voltage (±10%)
Power
consumption Idle 9.5W
Printing Max. 30.0W
Operation
condition Temperature 10°C - 35°C (50°F - 95°F)
Relative humidity 20% - 85%
Storage condition
Temperature -25°C - 40°C (-13°F - 104°F)
Relative humidity 20% - 85%
Noise level
Sound Power Level L WA (1B=10dB)
Printing: 5.5[B], Print mode: Normal,
Standby: Background noise level
Sound Pressure Level L
PA (bystander positions)
Printing: 45[dB(A)], Print mode: Normal,
Standby: Background noise level
Noise emission measurement in accordance with ISO 7779.
Emission Concentration
(measurement according to RAL-UZ62)
Dust: less than 0.075mg/m
3
As a part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.