Sharp AJ-2200 - Manual (Page 29)

27
SETTI
NG
UP
FO
R
Wi
ndow
s
INSTALLING THE PRINTER DRIVER
Installing onto Windows 98 (USB interface)
1 Make sure that the printer is connected to your computer by
USB cable.
2 Turn on the printer, and then turn on your computer.
"Add New Hardware Wizard" window will appear.
3 Click the "Next" button.
4 Check the radio button for "Search for the best driver for your
device (recommended)", and then click the "Next" button.
5 Insert the supplied CD-ROM into your CD-ROM drive.
If this window does not appear, ensure to connect the printer and your computer.
If the window does not appear while the printer and your computer is securely
connected by USB cable, refer to "'Add New Hardware Wizard' does not appear
(USB interface)" in "Troubleshooting" of the online manual.