Sharp 32N-S500 - Manual (Page 7)

7
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote control, place it under
a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
L Location of Controls (ENGLISH)
Front Panel
CHANNEL UP/DOWN – MENU
(
8 ) Selects next higher channel.
( 9 ) Selects next lower channel.
• Press both at the same time to access the
MAIN MENU screen.
POWER
Press
→
On.
Press again
→
Off.
Basic Remote Control Functions
SENSOR AREA FOR REMOTE CONTROL
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
POWER
Press
→
On.
Press again
→
Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite programs by
using the four categories A, B, C and D. The
channels can be accessed quickly by using
these buttons. (See page 23.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects the TV
adjustments.
TV-CATV MODE SELECT SWITCH
In TV position, sends power and channel select
commands (Channel up/down and Random
Access buttons) to the TV.
In CATV position, sends power and channel
select commands to a cable TV converter.
VCR CONTROL
See page 27.
DISPLAY
Press
→
Display receiving channel for four
seconds.
Press again
→
Displays remaining time of
SLEEP TIMER and VIEW TIMER.
Press again
→
Temporarily displays receiving
channel when in Closed Caption mode.
Infrared Transmitter Window
INPUT
Press
→
Switch to external video INPUT 1
mode.
Press again
→
Switch to external video INPUT
2 mode.
Press again
→
Switch to external video INPUT
3 mode.
Press again
→
Switch back to the original TV
mode.
See page 25.
ENTER
Used in some instances where a VCR or Cable
Converter Box requires an “enter” command
after selecting channels, when using the
REMOTE KEYPAD button. (See page 27)
CHANNEL UP/DOWN
(
8 ) Selects next higher channel.
( 9 ) Selects next lower channel.
• See pages 21 - 22 for channel presetting.
• Moves the “
: ” mark of the MENU screens.
MENU
Press
→
Accesses MAIN MENU.
Press again
→
Exits MAIN MENU.
MUTE
Press
→
Mutes sound.
Press again
→
Restores sound.
• CLOSED CAPTION appears when sound is
muted.
PIP FUNCTION
You can watch two pictures at the same time.
See page 24.
VIDEO/AUDIO TERMINALS
(VIDEO/AUDIO terminals are also provided on
the rear.) IN 2
1 2 3
4 5 6
7 8 9
0 100
POWER
TV
VCR
MENU
CATV
PAUSE
PIP
TV
FLASHBACK
INPUT
TV • VCR • CATV
STOP REC
REW PLAY FF
VCR CH
SWAP FREEZE MOVE SELECT
CM SKIP DISPLAY MUTE
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
POWER CH – VOL + POWER VIEW TIMER
POWER CH – VOL + POWER VIEW TIMER
MENU
MENU
LED LED
NOTE:
Quick Reference Control Operation