Set up (continued) – Sharp 32N-S500 User Manual
Page 23
23
1
2
3
4
5
6
7
8
9
0
100
ENTER
125
25
40
4
18
20
1
2
3
4
5
6
7
8
9
0
100
POWER
TV
VCR
MENU
FLASHBACK
INPUT
VOL
—
CH
CH
VOL
+
ENTER
A
B
C
D
PERSONAL PREFERENCE
L
PERSONAL PREFERENCE
By setting the PERSONAL PREFERENCE channels in
advance, you can select your favorite channels easily. You
can program six favorite channels in four different
categories. (total of 24 channels)
1
Repeat steps 1 to 3 of EZ SETUP
2
Confirm the “
:
” mark is at “PERSONAL PREF.”.
3
Press
VOL (+) or (–) to access PERSONAL
PREFERENCE mode.
4
Press
CH UP (
8
) or
DOWN (
9
) and
VOL (+) or (–)
to move the “
:
” mark to the desired position.
5
Use the
REMOTE KEYPAD to input the CHANNEL
Number into the memory.
Example:
125: — Press "100” followed by “2” and then “5”.
6
Repeat steps 4 and 5 to input the next CHANNEL
Number.
7
Press
MENU to exit.
L
To select the PERSONAL PREFERENCE
channel.
If the channels are memorized as shown here:
L
BLUE SCREEN
Automatically turns the screen blue if a
broadcast signal is not received.
1
Repeat steps 1 to 3 of EZ SETUP.
2
Press
CH UP (
8
) or
DOWN (
9
) to move the “
:
”
mark to “BLUE SCREEN”.
3
Press
VOL (+) or (–) to access BLUE SCREEN
mode.
4
Press
VOL (+) or (–) to turn STATUS “ON”.
5
Press
MENU to exit.
• Poor reception due to weak signals, or too much noise might
activate the BLUE SCREEN function despite the presence of a
broadcast signal. To continue watching TV under these conditions,
switch the BLUE SCREEN “OFF”.
• While either VCR or COMPONENT VIDEO input mode are
selected, the BLUE SCREEN will not be shown on your TV even
if the BLUE SCREEN is turned on.
• If you choose the BLUE SCREEN mode, sometimes the BLUE
SCREEN will appear or disappear due to the condition of the
reception. In this case, cancel the BLUE SCREEN mode.
VOLUME (+)/(–)
CHANNEL UP
(
8
)/DOWN (
9
)
MENU
INPUT
(PERSONAL PREFERENCE mode)
(BLUE SCREEN mode)
Set Up (Continued)
(SET UP mode)
(SET UP mode)
CH
CH
VOL
—
VOL
+
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
VOL
—
VOL
+
NOTE:
REMOTE
KEYPAD
125
25
40
4
18
20
Then press the Remote's "A" button to select the
Channels below: