Sony DF70P - Manual (Page 45)

A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory setting Menu
45
consecutive 2 digits number is added to the Image
file name.
Tip
A consecutive number added to Date & time and
Sequence number is used to identify each of multiple
files created with one alarm event.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the connected alarm.
Sensor input: The external sensor which is connected to
the sensor input of the camera I/O port.
Motion detection: Click Motion detection button, and
the Motion detection setting page is displayed. You
can set the motion detection function (page 52).
Note
Motion detection works only when the Video mode is
set to MPEG4 and the Cropping is set to Off.
Effective period
Set the period when the alarm detection is effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period when the alarm
detection is effective in the schedule setting in the
other section.
Click Schedule and the setting menu for the effective
period is displayed. (“Setting the Schedule —
Schedule setting Menu” on page 50)
Alarm buffer
Select Use alarm buffer when you forward the image/
audio of before and after the alarm detection (pre-alarm,
post-alarm).
If you do not select, only the image of the moment of the
alarm detection is forwarded.
Click Alarm buffer to display the Alarm buffer setting
menu.
For details, see “Setting the Alarm Buffer — Alarm
buffer setting Menu” on page 51.
OK/Cancel
See “Buttons common to every setting menu” on page
24.
Periodical recording Tab — Setting
the Periodical recording mode
You can set to record the image file to the built-in
memory periodically.
Periodical recording
Select On when you want to use periodical recording. If
you select Off, the Periodical recording is not executed.
Image file name
Type the file name of the image recorded to the built-in
memory up to 10 alphanumeric, - (hyphen) and _ (under
score).
Note
You cannot send the audio file by using the periodical
recording function.
Suffix
Select a suffix to add to the file name.
None: The recording file name will be the Image file
name.
Date & time: The date & time suffix is added to the
Image file name.
The date/time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits), second (2 digits), and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and two fixed
digits 00 is added to the Image file name.
Sequence number clear
Click Clear and the suffix of the sequence number
returns to 1.