Sony DF70P - Manual (Page 44)

A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory setting Menu
44
Overwrite
Select to overwrite the file or not when there is
insufficient memory space to record the image.
Select On to overwrite from the oldest file or folder.
Select Off to prohibit overwriting. In this case, a new
file cannot be stored.
Capacity warning
Select On to send a warning mail to the Administrator
when the built-in memory space is low or the memory is
full. Select Off if you do not want to send a warning
mail.
Note
When the Overwrite is set to On, a warning mail is not
sent to the Administrator.
SMTP server name
Type the name of the SMTP server to use for sending an
e-Mail, up to 64 characters.
Otherwise type the IP address of SMTP mail server.
Authentication
Select the authentication required when you send an e-
Mail.
Off: Select if no authentication is required when an e-
Mail is sent.
On: When authentication is required an e-Mail is sent,
select one of the authentication methods from the
followings..
SMTP: Select if authentication is required when an
e-Mail is sent.
POP before SMTP: Select when POP before
SMTP is required when an e-Mail is sent.
Note
When you set to On, make sure to select either or both
SMTP or/and POP before SMTP.
POP server name
This is necessary when POP before SMTP is selected
in Authentication.
Type POP (receiving mail) server name up to 64
characters. Otherwise type the IP address of POP server.
This setting is necessary when SMTP server that sends a
mail authenticates using the account of POP user.
User name, password
Type the user name and the password of the user who
has the mail account. This setting is necessary when
SMTP server that sends a mail authenticates.
Administrator e-Mail address
Type the e-Mail address of the recipient of the warning
mail (e-Mail address of the camera Administrator), up to
64 characters.
OK/Cancel
See “Buttons common to every setting menu” on page
24.
Alarm recording Tab — Setting the
Image Memory Function when
Detecting the Alarm
You can set to record the image and audio file to the
built-in memory linked with the external sensor input or
with the built-in motion detection function.
Alarm recording
Select On to set to record the image and audio file to the
built-in memory linked with the external sensor input or
with the built-in motion detection function.
Image file name
Type the file name you want to assign to the images
when saving in the built-in memory. You can use up to
10 alphanumeric characters, - (hyphen) and _
(underscore) for naming.
Suffix
Select a suffix to add to the file name.
Date & time: The Date & time suffix is added to the
Image file name.
The Date & time suffix consists of lower two-digits
of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits)
and consecutive number (2 digits), thus 14-digit
number is added to the file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and an