Sharp MD-MX30 - Manual (Page 32)

31
■ Erase
To erase all of the tracks at once:
1
Press the MD ■ button.
● The total number of tracks and the total playing time on a
MiniDisc will appear.
2
Press the NAME/TOC EDIT button, and within 10 sec-
onds, select "ALL ERASE" using the jog dial.
3
Within 10 seconds, press the MEMORY/ENTER button.
● To cancel the operation, press the MD ■ button.
4
Press the MEMORY/ENTER button again.
● All of the track numbers and track names will be erased.
Note:
● This function cannot be used in the random play mode and
APMS play mode.
To erase tracks one at a time:
1
While in the stop mode, select the track you want to
erase using the jog dial.
Or start playing the track to be erased, and then press
the MD
06 06 06 06 06
button.
2
Press the NAME/TOC EDIT button, and within 10 sec-
onds, select "ERASE" using the jog dial.
3
Within 10 seconds, press the MEMORY/ENTER button.
● To cancel the operation, press the MD ■ button.
4
Press the MEMORY/ENTER button again.
● The track is erased, and the unit is stopped at the begin-
ning of the next track.
Notes:
● When a track is erased, the numbers assigned to the tracks
following the erased track will be automatically decreased
by one.
● When a track is erased, the track name will be erased at
the same time.
● This function cannot be used in the random play mode and
APMS play mode.
■ All Erase
(Continued)
Tracks you want to erase can be erased one at a
time.
● Once a track has been erased, it cannot be recovered.
Double-check the track number before erasing it.
A B C
A B D E
D
1 2 3 4
1 2 3 4
E
5
3,4
1
1,2
2
3,4
1
2
2
All of the tracks you want to erase can be erased
at once.
● Once all of tracks have been erased, they cannot be re-
covered. Double-check the tracks before erasing them.
A B C D
1 2 3 4
E
5
BLANK
MD ■