beautypg.com

Clearing the toner low replace toner message, Maintenance parts – Samsung ML-3050 User Manual

Page 40

background image

8.4

3

Remove the new toner cartridge from its bag.

Caution

Do not use sharp objects, such as a knife or scissors, to open

the toner cartridge package. They might scratch the drum of

the cartridge.

4

Remove the packing tape and roll the cartridge 5 or 6 items to

distribute the toner.

Thoroughly roll the cartridge to assure maximum copies per

cartridge. Save the box and the plastic bag for shipping.

Cautions

• If toner gets on your clothing, wipe it off with a dry cloth and

wash clothing in cold water. Hot water sets toner into fabric.

• To prevent damage to the toner cartridge, do not expose it

to light for more than a few minutes. Cover it with a piece of

paper, if necessary.

• Do not touch the green surface underside of the toner

cartridge. Use the handle on the cartridge to avoid touching

this area.

5

Hold the toner cartridge by the handle and slowly insert the

cartridge into the opening in the printer.

6

Tabs on the sides of the cartridge and corresponding grooves

within the printer will guide the cartridge into the correct position

until it locks into place completely.

7

Close the front cover. Make sure that the cover is securely closed.

Clearing the Toner Low Replace Toner message

When the Toner Low Replace Toner message appears you can

configure not to see this message again not to disturb you.

1

Press Menu until System Setup appears on the bottom line of the

display and press OK.

2

Press the Scroll buttons until Maintenance appears and press OK.

3

Press the Scroll buttons until CLR Empty Msg. appears and press

OK.

4

Select On and press OK.

5

Now the Toner Low Replace Toner message does not appear but

the Replace Toner message will remain for reminding you that the

new cartridge needs to be installed for quality.

Caution

Once you have selected On, this setting will be permanently

written to the memory of the toner cartridge, and this menu will

be disappeared from the Maintenance menu.

Maintenance parts

To avoid print quality and paper feed problems resulting from worn parts

and to maintain your printer in top working condition the following items

will need to be replaced at the specified number of pages or when the

life span of each item has expired.

Samsung highly recommends that an authorized service provider, dealer

or the retailer where you bought printer performs this maintenance

activity.

Items

Yield (Average)

Transfer roller

70,000

Pick-up roller

150,000

Fuser unit

80,000