Sampo DR-S0426 - Manual (Page 21)

19
4 Hard disk
Maximum 2 pieces and at lease one hard disk should be connected, the capacity of
hard disk from 40GB to 400GB for each.
When you restart the power of this appliance after install or replace new hard disk it
will format automatically, we tested the following model for your reference:
Brand Model Capacity Speed (rpm)
Seagate ST380011A 80GB 7200 rpm
Seagate ST3120023A 120GB 7200 rpm
Seagate ST3160023A 160GB 7200 rpm
Seagate ST3400832A 400GB 7200 rpm
Maxtor 6Y120L0 120GB 7200 rpm
Maxtor 6Y080L0 80GB 7200 rpm
Maxtor 6Y160P0 160GB 7200 rpm
Maxtor 7Y250P0-A 250GB 7200 rpm
We DO NOT suggest Samsung \ Western Digital \ Maxtor DiamondMax 10 series hard drive
base on technical examination.
5 VCR
1. VCR Backup
The DVR Provides composite signal output for back-up use. You can keep the Image
data, and simply just connected BNC connector, at the Back Panel of, with MONITOR
OUT Connector. Press VCR REC button, after decided what recording data need to keep,
during Play-Back Mode.
6 Alarm control
There are three types of alarms that the system can be configured to handle. They are
1.External Alarm, 2.Video Lost Alarm and alarm of 3.Motion Detection.
When alarm are triggered, it changes recording speed to the alarm recording speed.
Video Lost alarm is enabled as default and cannot be changed. The buzzer will action
and "V.LOSS" sign will be indicated on the screen.