Sampo DR-S0426 - Manual (Page 19)

17
3.1 Time Search：
TIME SEARCH
HDD1: MASTER
START TIME: 2005/MAY/04 08:00:00
^
HARD DRIVE: MASTER
START TIME：2005/MAY/03 08:12:03
END TIME：2005/MAY/04 10:10:55
HARD DRIVE: SLAVE
START TIME：N/A
END TIME：N/A
[RIGHT/LEFT] TO MOVE [UP/DOWN] TO CHANGE
[PLAY] TO PLAY [QUAD] CHANGE HDD [MENU] EXIT
When entered "TIME SEARCH" mode, by QUAD key change hard disk, screen will
indicates the earliest record on corresponding hard drive with title "START TIME"
and "END TIME". Use "◄" or "►" keys to setup condition for time search, an arrow
mark "^" will show up on corresponding location for adjustment. Use "▲ "or "▼
"keys to increases or decrease value for search condition on time or date. Press
►PLAY key to start playing back.
3.2 Event List：
EVENT LIST
HDD1: MASTER
START TIME: 2005/MAY/16 12:07:00
END TIME: 2005/MAY/16 12:07:30
>01 RECORD 2005/MAY/16 12:07:00
02 MOT CH1 2005/MAY/16 12:06:00
03 MOT CH2 2005/MAY/16 12:05:00
04 MOT CH3 2005/MAY/16 12:04:00
05 ALM CH1 2005/MAY/16 12:03:00
06 ALM CH2 2005/MAY/16 12:02:00
07 ALM CH3 2005/MAY/16 12:01:00
PRESS [UP/DOWN] TO MOVE [PLAY] TO PLAY
[QUAD] TO CHANG HDD [MENU] TO EXIT
When entered "EVENT LIST" mode, we needs to choose a hard drive to start search
for recorded data. Use QUAD key to choose a hard drive to start. Screen will
indicates the event list on corresponding hard drive with the event type, start date
& time. Use "▲"or "▼" keys to setup condition for time search, an arrow mark ">"
will show up on corresponding location for adjustment. Use "▲ "or "▼"keys to
select the event item, and press ►PLAY key to start playing back.