Sagem 912 - Manual (Page 29)

28
7. Call related features
2 Place on hold the current call (or
multi-conference calls) and accept
the call holding or waiting (or multi-
conference calls).
2 X Place on hold the multi-conference
calls except for the current call
order number X (private call).
3 Add a call holding (or multi-
conference calls) to the current call
(or to the multi-conference).
Tel N° Place on hold the current call (or
the multi-conference calls) and call
another telephone number.
Note: However, it is preferable to place
the call on hold then dial, then call;
this guarantees comfort and
confidentiality (does not allow the
call holding to hear the dialling
tones whatever the configuration of
the phone).
End all calls except for a possible
call waiting.
7.9 Checking call duration
CALLS/DURATION/COUNTERS
Attention
This data is purely
indicative and
cannot constitute a
basis of proof: the
network metering
criteria may be quite
different (indivisible
minutes etc.).
This menu allows you to check the duration
of the last call. To check the cumulated
duration of all calls since the last counter
reset, press the scrolling arrows.
CALLS/DURATION/CLEAR
This menu allows you to clear the duration of
the last call and to reset the call counter.
7.10 Charge-checking (*)
CALLS/COST/COUNTERS
If the network allows, you can
check the charge for the last call.
To check the cumulated charge for
all calls since the last counter reset:
Press the scrolling arrows.
CALLS/COST/CLEAR
This menu allows you to clear the
cost of the last call and to reset the
call counter after entering your
PIN2 code.