Sagem 912 - Manual (Page 17)

16
5. Directory
5.3Storing a number
DIRECTORY/POSITION
■ Using this menu, display a
screen with MEM001 (first
position of SIM card).
Press ✱ to access the first
available location in the directory.
■ Press Ok, then enter the name to
be stored (the number of
characters accepted depends on
the SIM card).
■ Press Ok, then enter the phone
number to be stored preceded by
the area code if necessary (up to
20 characters). Validate by
pressing Ok.
You can introduce pauses in the
number (indicated by comas “,”) by
holding down ✱ or # (including on
the standby screen). The numbers
dialled after a pause are used in
DTMF sequences (which can be
used after a call number).
5.4 Deleting a number
To cancel the content of a directory
address, erase the name and the call
number at that address, then press Ok.
It is advisable to
store numbers in
their international
format (+, country
code, and number). Modification of a
stored number
When the number is
displayed, press ✱,
you can then modify
or add to the
number (prefix to
add for an extension
number for
example).
Pressing on the ✱
key launches a
search for the first
available location.
5.5 Making a call to a stored
number
■ Enter the memory number in
which you stored the required
phone book references, then
press # (quick call).
or
■ Type in the first letter(s) of the
required name stored in the
phone book, then press ,
or
■ Enter the memory number in
which you stored the required
references in the phone book
then press ✱; then you can
modify or complete the phone
number (the prefix can be a
phone extension, for example).
Press to initiate the call.