Sharp XE-A303 - Manual (Page 75)

73
Part
3 FOR THE MANAGER Part
2
Part
1
Rounding amount printing (A)
Total amount rounding when a transaction is finalized directly by
X , Y , c
or
b key(B)
• When you live in Australia, set as shown on the tale below for the parameters A and B.
Rounding up of the unit digit of amount (C)
Rounding down of the unit digit of amount (D)
• Handle C and D as a pair. When you live in Australia, Switzerland, Norway or South Africa, set as shown on
the table below for the parameters C and D.
The rounding is performed as follows:
In case C = 0: Unit digit of amount < or = Value of D — rounding down
Value of D < or = Unit digit of amount — rounding to 5
In other cases: Unit digit of amount < or = Value of D — rounding down
Value of D < Unit digit of amount < Value of C — rounding to 5
Value of C < or = Unit digit of amount — rounding up
Application of rounding (E)
Limit of the least significant digit in entering amount of item (F)
Memory of difference due to rounding (G)
Limit of the least significant digit in entering amount of payment (H)
• When you live in Australia, Switzerland, Norway or South Africa, set as shown on the table below for the
parameters E through H.
CD E F G H
Switzerland 82 Item & payment 0 and 5 only No 0 and 5 only
Norway 54 Payment Arbitrary Yes 0 only
South Africa 05 Payment Arbitrary Yes 0 and 5 only
A B CD E F G H
Australia Yes Not rounding 82 Payment* Arbitrary Yes 0 and 5 only
* Applied to payment by cash and change amount.
Job code: 68
* Item: Selection: Entry:
A Printing format for split pricing entry Normal* 0
Australian format 1
B to H Always enter 0. 0
A303_3(En) 06.7.22 4:41 PM Page 73