Sharp XE-A303 User Manual
Page 58
56
4. Sign programming (Press
s
to skip. / Press
A
to terminate.)
5. Discount calculation (for the items) programming (Press
s
to skip. / Press
A
to terminate.)
6. Discount calculation (for the subtotals) programming (Press
s
to skip. / Press
A
to terminate.)
7. Percent rate limit programming (Press
s
to skip. / Press
A
to terminate.)
% HALO PROG.
02 90.00
90.00
(1) Enter percent rate limit using numeric key.
The rate limit can be set from 0.00 to 100.00.
Default setting is 100.00.
% HALO PROG.
02 100.00
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the discount calculation for the
subtotals does not need to be changed from "SBTL
ENABLE". Otherwise, press
:
key to display
"SBTL DISABLE".
Each time
:
key is pressed, the display shows
"SBTL DISABLE" and "SBTL ENABLE" alternately.
Default setting is "ENABLE".
ENTRY FOR SBTL
02 SBTL ENABLE
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the discount calculation for the items
does not need to be changed from "ITEM
ENABLE". Otherwise, press
:
key to display
"ITEM DISABLE".
Each time
:
key is pressed, the display shows
"ITEM DISABLE" and "ITEM ENABLE" alternately.
Default setting is "ENABLE".
ENTRY FOR ITEM
02 ITEM ENABLE
s
(2) Press the
s
key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the sign does not need to be
changed from "(-)". Otherwise, press
:
key to
display "(+)".
Each time
:
key is pressed, the display shows
"(+)" and "(-)" alternately.
Choose "(-)" for discount and "(+)" for premium.
Default setting is "(-)".
A303_3(En) 06.7.22 4:41 PM Page 56