Sealife DC 600 - Manual (Page 66)

Digital Camera >>
64
Setup Menu (In Playback Mode)
1. Slide the mode switch to [ ].
2. Press the
MENU button, and select
the [Setup] menu with the button.
[Setup] menu is displayed.
3. Select the desired [Setup] option item
with the / buttons, and press the
SET button to enter its respective
menu.
4. Select the desired setting with the / buttons, and press the SET
button.
5. To exit from the menu, press the MENU button.
Beep
Refer to section in this manual titled
“Beep” in Setup Menu (In
Photography Mode) for further details.
Format
Refer to section in this manual titled
“Formatting the SD Card or Internal
Memory” for further details.
Fr. No. Reset
Refer to section in this manual titled
“Fr. No. Reset” in Setup Menu (In
Photography Mode) for further details.
Card Info.
This displays the free capacity of the SD card. If the SD card is not inserted,
“NO CARD” message is displayed on the screen.
System Info.
This displays the firmware version of the camera.
Language
Refer to section in this manual titled
“Choosing the Language” for
further details.
Video Output
This sets video output system of the video equipment that you are go-
ing to connect to the camera.
* NTSC / PAL