Sealife DC 600 - Manual (Page 101)

User’
s Manual >>
99
No Power Battery power low Recharge battery
Power save function activated. Turn camera back on.
Camera damaged
Contact service center.
Camera gets hot Constant use of camera. This is normal.
No PC connection USB cable not connected
to USB port. Inspect connection ports.
Camera driver not installed Install camera driver CD
for Windows 98 only.
No Video Connection Improper connection to TV Connect video cable to video
IN jack of TV or VCR and
change TV/VCR to video in
channel
Poor Video connection Video cable not fully inserted
into camera or TV
Make sure video cable is
completely inserted into
video jack of camera docking
station. Also check that
connection to TV/VCR is
correct.
“Memory full” message Memory storage is full. Delete images or download
to PC. Insert empty memory
card.
Pictures out of focus Dirty lens. Clean lens with clean cotton
cloth.
Fogged housing lens. Insert camera in dry,
air-conditioned room. Use
anti-fog desiccant inside
housing. Do not let water
drops get inside housing.
Low water visibility Shooting distance not to
exceed 1/10 of visibility.
Auto focus not set Camera did not establish
correct focus setting. Select
landscape (infinity) focus
Grainy picture Dark light conditions. Move closer to subject
(2’ to 6’). Use SeaLife
accessory Flash to illuminate
subject and improve color
and brightness..
Problem Cause Solution