beautypg.com

Schumacher Automatic XM1-5 User Manual

Page 3

background image

• 2 •

Use only recommended attachments. Use of an attachment not

1.3

recommended or sold by Schumacher

®

Electric Corporation may

result in a risk of fire, electric shock or injury to persons or damage

to property.

To reduce the risk of damage to the electric plug or cord, pull by

1.4

the plug rather than the cord when disconnecting the charger.

An extension cord should not be used unless absolutely necessary.

1.5

Use of an improper extension cord could result in a risk of fire and

electric shock. If an extension cord must be used, make sure:

That the pins on the plug of the extension cord are the same

number, size and shape as those of the plug on the charger.

That the extension cord is properly wired and in good electrical

condition.

That the wire size is large enough for the AC ampere rating of the

charger as specified in section 8.

To reduce the risk of electric shock, unplug the charger from the

1.6

outlet before attempting any maintenance or cleaning. Simply

turning off the controls will not reduce this risk.

Do not operate the charger with a damaged cord or plug; have the

1.7

cord or plug replaced immediately by a qualified service person.

(Call customer service at: 1-800-621-5485.)

Do not operate the charger if it has received a sharp blow, been

1.8

dropped or otherwise damaged in any way; take it to a qualified

service person. (Call customer service at: 1-800-621-5485.)

Do not disassemble the charger; take it to a qualified service

1.9

person when service or repair is required. Incorrect reassembly

may result in a risk of fire or electric shock. (Call customer service

at: 1-800-621-5485.)

RiSK OF EXPLOSiVE GASES.

WORKING IN THE VICINITY OF A LEAD-ACID

1.10

BATTERY IS DANGEROUS. BATTERIES GENERATE

EXPLOSIVE GASES DURING NORMAL BATTERY

OPERATION. FOR THIS REASON, IT IS OF

UTMOST IMPORTANCE THAT YOU FOLLOW THE

INSTRUCTIONS EACH TIME YOU USE THE CHARGER.

To reduce the risk of a battery explosion, follow these instructions

1.11

and those published by the battery manufacturer and the