Dust port – Woodstock SHOP FOX W1686 User Manual
Page 16
ASSEMBLY
-14-
Dust Port
Connect a dust collector to the 4" dust port on
the back of the sander as shown in Figure 5.
If you do not have a dust collection system, you
can buy adapters to allow hook-up to a shop vac-
uum. Although not as adequate as a dust collec-
tor, a shop vacuum will help reduce the amount
of uncontained dust and debris.
Figure 5. Attach a dust collection system to
the 4" dust port to reduce the amount of
uncontained dust.
Failure to use a dust col-
lection system can result
in short and long-term res-
piratory illness. DO NOT
operate the Model W1686
without an adequate dust
collection system. This
machine creates substan-
tial amounts of wood dust
while in operation.