Sony Ericsson K700c - Manual (Page 31)

This is the Internet version of the user's guide. © Print only for private use. 31
Calling
To activate voice dialling and
record names
1 } Settings } the General tab } Voice control
} Voice dialling } Activate } New voice and
select a contact.
2 If the contact has more than one number, use
and to view the numbers. Select the
phone number to which you want to add the
voice command. Now you are going to record
a voice command such as “John mobile” for the
phone number you selected.
3 Instructions appear. Lift the phone to your ear,
wait for the tone and say the command that you
want to record. The voice command is played
back to you.
4 If the recording sounds ok } Yes . If not } No
and repeat step 3.
5 To record another voice command for a contact
} New voice again and repeat steps 2-5 above.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
To turn the caller name On or Off
} Settings } the General tab } Voice control
} Play caller name .
Voice dialling
You can voice dial by saying a pre-recorded voice
command. Start voice dialling from standby using
the phone, a portable handsfree, a Bluetooth headset
or by saying your magic word.
To make a call from the phone
1 From standby, press and hold one of the
volume buttons.
2 Lift the phone to your ear, wait for the tone and
say the name you recorded earlier, for example
“John mobile”. The name is played back to you
and the call is connected.
To make a call with a handsfree
From standby, press the handsfree button, or
Bluetooth headset button.