Listening to the radio, Ra dio, Manual or auto tuning 1 – Sharp SD-EX220 User Manual
Page 22
22
SD-EX220
03/6/19
SD-EX220(U).fm
TINSE0560AWZZ
Ra
dio
- Lis
te
ning t
o
the
ra
dio -
Listening to the radio
Manual or Auto tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band.
3
Press the TUNING ( or ) button on the front of the unit to tune in
to the desired station.
You can also tune in to the desired station by pressing the
or
button on
the remote control.
Manual tuning:
Press the TUNING button as many times as required to tune in to the desired sta-
tion.
Auto tuning:
When the TUNING button is pressed for 0.5 seconds or more, scanning will start
automatically and the tuner will stop at the first receivable broadcast station.
Notes:
z
When radio interference occurs, auto scan tuning may stop automatically at
that point.
z
Auto scan tuning will skip weak signal stations.
z
To stop the auto tuning, press the TUNING button again.
FM stereo
FM monaural
AM