beautypg.com

Cd p lay ba ck, Advanced cd playback (continued), Direct play – Sharp SD-EX220 User Manual

Page 20: Switching the time display, Repeat or random play

background image

20

SD-EX220

03/6/19

SD-EX220(U).fm

TINSE0560AWZZ

C

D

P

lay

ba

ck

- Adva

n

c

ed CD P

la

y

back

-

Advanced CD Playback (continued)

„

Direct play

By using the direct buttons, the desired tracks can be played.

Notes:

z

After pressing the " 10" button, the two digits must be entered within 5 seconds of
each other.

z

It is not possible to enter a track number higher than the total tracks of the CD.

z

You cannot select a track with the direct buttons while in random or program play.

„

Switching the time display

Each time the TIME button on the remote control is pressed during playback, the dis-
play will change.

„

Repeat or random play

You can select one of three playback modes; "Repeat play", "Random play" and
"Normal play".

To repeat a programmed sequence:

Perform steps 1 - 5 in the "Programmed play" section on page 21 and then select
repeat playback.

Notes:

z

During "Programmed play" operation, the random mode cannot be selected by the
PLAY MODE button.

z

After using repeat play, be sure to press the button. Otherwise, the disc will play
continuously.

z

The random play will stop automatically when all tracks are played once. (The
same track will not be played back twice.)

z

In random play, the CD player will select and play tracks automatically. (You can-
not select the order of the tracks.)

To cancel repeat or random play:

Press the PLAY MODE button repeatedly to select the normal play mode.

Press the direct buttons to select the desired track.

The direct buttons will allow you to select and play any track from 1 to 10 automati-
cally.

To select a track between 11 and 99:

Press the " 10" button followed by the two digits of the track number.

For example, to choose 28

1 Press the " 10" button.
2 Press the "2" button.
3 Press the "8" button.

The elapsed playing time for the current track will
be displayed.

The remaining playing time for the current track
will be displayed.

1

When in the CD mode, press the PLAY MODE button repeatedly to
select the playback mode.

2

Press the

button to start playback.

Normal play

Repeat play

Random play