Sony FX52L - Manual (Page 9)

9
Features
O
v
er
vi
ew
Features
High brightness, high picture
quality
• High brightness
The high aperture ratio LCD panel with a
microlens and the 300 W lamp provide
high brightness (light output 6000 ANSI
lumen) and excellent uniformity on the
picture.
• High resolution
By adopting three 1.3-inch high definition
panel, approximately 790,000-pixels
XGA panels, the resolutions of 1024 ×768
pixels for RGB input, and 750 horizontal
TV lines for video input.
• High picture performance
The DDE (Dynamic Detail Enhancer)
technology, originally developed by Sony,
enables converting interlace format video
signals to progressive format, allowing
you to obtain a detailed picture.
The technology also reproduces the film
sources in 2-3 Pull-Down format with
smooth picture movement.
The internal RGB enhancer provides
sharper RGB pictures. The 10-bit 3D
Digital Gamma correction for good
picture uniformity is also provided.
Convenient and flexible setup
• Power zoom/power focus lens and the
lens shift function
The projector is equipped with a 1.3-times
power zoom and power focus lens*, which
allows you to change the size of the
projected image without having to move
the projector. The lens shift function
enables you to install the projector in a
wide range of locations, without worrying
about trapezoid distortion. Also, three
optional lenses are available for the
projector, depending on your setup
condition.
*For VPL-FX52 (with standard lens) only
• Center positioned lens
The projector is designed to locate the lens
in the center of the unit. This enables an
easy setup, as the lens center aligns with
the center of the screen.
• Tilt installation (in front and rear)
You can install the projector by tilting it 90
degrees at the rear or 90 degrees in front.
You can use a mirror for rear projection.
• Direct Power On/Power Off function
The AC power for the entire system can be
turned on and off by means of a breaker or
other switch.
• Twin stack installation
Thanks to the lens shift function, two
projectors can be stacked, which improves
the brightness of the image.
• System expandability using a network
Connection to a LAN allows you to obtain
projector status information such as the
lamp timer or to control the projector away
from the installation location via a Web
browser.
Also, this projector enables the sending of
mail that contains messages on the time for
replacement of the projector lamp, error
occurrences, etc., to mail addresses that
have been specified. This projector
corresponds with SNMP.
Multi scan compatibility
• DVI, 5BNC and HD D-sub 15 pin
connectors
The projector has the DVI (Digital Visual
Interface) connector, the digital input
connector, which allows you to connect to
the digital RGB equipment equipped with
the DVI output. The 5BNC input
connectors allow you to connect to
workstation output high-resolution signals
and to connect to a computer from a long
distance.
• Accept various input signals
The projector accepts video signals of the
composite, S video and component, and
can also display the VGA, SVGA, XGA,
SXGA, SXGA+ and UXGA (60 Hz)
signals.
The projector has 46 preset data for input
signals in the memory.
• Compatible with six color systems
NTSC
3.58
, PAL, SECAM, NTSC
4.43
1)
,
PAL-M or PAL-N color system can be
selected automatically.
...............................................................................
1)NTSC
4.43
is the color system used when
playing back a video recorded on NTSC on
an NTSC
4.43
system VCR.