Sony VGC-RM1 - Manual (Page 80)

80 n N
Customizing Your VAIO Computer
To add the power-on password
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
4 On the password entry screen, enter the password twice and press the Enter key.
The password can be at least 2 and at most 19 characters (including spaces) long.
✍
The following is to configure your computer to display the BIOS setup screen.
5 Press the < or , key to key to select Exit, select Exit Saving Changes, and then press the Enter key.
At the confirmation prompt, press the Y key.