How to configure the driver – Schneider Electric Communication Drivers User Manual
Page 82
Installation
82
How to configure the driver
At a Glance
During driver installation, a default configuration profile is proposed. You are able to
modify this profile or create a new one.
How to create a
new profile
From the driver configuration screen,
How to remove a
profile
From the driver configuration screen,
Note: If all the network connections are in use or if there are none on the station,
a profile cannot be created.
Step
Action
1
Select the menu Configuration
→
Create a profile.
Result
The following window appears:
2
From the TCP/IP drop-down menu, select the TCP/IP connection to the
network.
3
Click Ok .
Creation of a new XIP profile
XIP01
OK
Cancel
ADAPTER01(139.160.67.39)
XIP
XIP/IP
Step
Action
1
Select the menu Configuration
→
Create a profile.
2
From the drop-down menu, select the profile to be removed.
3
Confirm deletion with Ok .