Schneider Electric Communication Drivers - Manual (Page 108)

ISAWAY driver
108
How to adjust the ISA TPCX 57 card parameters
At a Glance Before installing the TPCX 57 card, you must adjust the following parameters:
l the rack number and the processor position,
l the standard I/O address,
l the IRQ interrupt address.
Illustration This card comprises the following elements:
Numbers and
elements The following table describes the different parameters to be adjusted:
1
2
3
4
Number Element
1 The processor’s rack position can be coded with the micro-switches.
2 The address of the rack which contains the processor can be coded with the
micro-switches.
3 The standard address of the processor can be coded on the ISA bus with the
micro-switches.
4 The IRQ (Interrupt Request) level can be coded with the micro-switches.