Schneider Electric Communication Drivers - Manual (Page 116)

PCIWAY driver
116
How to adjust the parameters of the TSX PCI 57 ••• card
At a Glance Before installing the TSX PCI 57 ••• card, you must:
l install the PCI 57 driver,
l code the rack number on the X Bus,
l code the position of the processor in the rack.
Illustration This card comprises the following elements:
Numbers and
elements The following table describes the different parameters to be adjusted:
2
1
Number Element
1 The address of the rack on the X Bus can be coded with the micro-switches.
2 The processor’s rack position can be coded with the micro-switches.