Schneider Electric Communication Drivers - Manual (Page 48)

TSX FPC 10 ISA card
48
Driver configuration screen for Windows NT
At a Glance The configuration tool is used to configure the driver in Fipway or Fipio mode to use
a ISA TSX FPC 10 card.
Illustration The screen dedicated to the card driver looks like this:
Description This table describes the different areas and buttons which make up the configuration
screen:
Dfpway - Configuration FIP FPC SN
Save
Read
By default
Fipio Mode
Fipway address
0
31
Fipio connection point 0
Driver instance
Fipio address
Station
Network
Fipway mode
FIP01
FIP02
FP FP
Zone Description
Fipway address This area is used to define the network address of the station when the
driver is configured in Fipway mode.
Fipio address This area is used to define the connection point number when the driver
is configured in Fipio mode.
Driver instance This area is used to select the instance of the driver used (max. 2).
Save Used to save the configuration of the driver that has just been entered.
Read Used to read the configuration of the driver saved previously.
By default Allows default automatic entry of the driver configuration.