Samsung HT-TQ25 - Manual (Page 23)

GB
22
OPERA
TION
To stop playback, press STOP during playback.
•
If pressed once, “ PRESS PLAY” is displayed and the stop position will be
stored in memory. If PLAY/PAUSE ( ) button or ENTER button is
pressed, playback resumes from the stop position. (This function works only
with DVDs.)
•
If pressed twice, “ STOP” is displayed, and if PLAY/PAUSE ( ) button is
pressed, playback starts from the beginning.
To temporarily pause playback, press PLAY/PAUSE
during playback.
• To resume playback, press PLAY/PAUSE ( ) button again.
DVD VCD CD
• Playback starts automatically.
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds
while the power is turned off.
• By default, the video format is set to "PAL".
• " NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button
shortly to select between " NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video
format of your TV.
Disc Playback
2
Load a disc.
• Place a disc gently into the tray with the disc’s label
facing up.
• Depending on the content of
the disc, the initial screen may
appear different.
1
Press OPEN/CLOSE button to open the
disc tray.
3
Close the compartment by pressing the
OPEN/CLOSE button again.
Note
HT-Q20(1~40P) GB 3/1/06 2:41 PM Page 25