Sanyo VPC-E890 - Manual (Page 61)

Camera Settings 45
The Setup Menu
Eng
lish
Auto Power Off
The Auto Power Off setting allows you to adjust the length of time
after which the camera will power down when inactive. Use the Up/
Down navigation buttons to select from the menu options. 2 options are
available:
• 5 MIN (default)
• 2 MIN
Video Out
The Video Out setting allows you to adjust the video output, depending
on the type of your TV. Use the Up/Down navigation buttons to select
from the menu options. 2 options are available:
• NTSC
• PAL (default)
USB Mode
The USB Mode setting allows you to select the transfer method
between your camera and your PC. 2 options are available:
• PTP (PictBridge Print): When the camera is connected to a
printer by a USB cable which supports
Pictbridge, it can directly print images
stored on the media. For details on PTP
function, please See “PictBridge Print
(PTP)” on page 49.
• MSDC (default): The camera is set up to act as a mass storage
device, allowing only for transfer of files between your camera and PC.
A U TO P O W E R O F F
5 M I N
2 M I N
V I D E O O U T
N T S C
PA L
U S B M O D E
P T P
M S D C