SMC Networks SMCWTVG - Manual (Page 5)

The SIP port number is set at 6060 . For the remaining tabs, you can
accept the default settings, or you change them to suit your setup. And
then click
Save and Apply .
After the ATA set up procedure is complete, the device is ready for use
and you can now receive and make outgoing calls.
8
9
To activate your Owtalk preconfigured device, you need to obtain an
activation number. Go to
My Account after sign-up for Owtalk at
http://www.owtalk.com . Press Port to Preconfigured and click Next to get
the activation number.
Simply dial the activation number after connecting your ATA to your
cable/ADSL modem, router, or broadband Internet connection. Your ATA is
then all set and ready for use.
Appendix A
Owtalk Preconfigured
SMC ATA