Samsung HT-Q9 - Manual (Page 29)

GB
56
To tune in to a preset station, press on the
remote control to select a channel.
• Refer to Step 2 on page 61 to
automatically or manually tune in
to a station.
2 1
• “PRGM” flashes in the display.
3
Example: Presetting FM 89.1 in the memory
Press TUNING
( , ) to select
"89.10".
Press the TUNER
button and select the
FM band.
5 4
• You can select between 1 and
15 presels.
Press the TUNER
MEMORY button.
Press the TUNER
MEMORY button
again.
6 To preset another
station, repeat steps
2 to 5. Press
to select preset
number.
RADIO OPERA
TION
Presetting Stations
55
2 1 Tune in to the
desired station.
Press the TUNER
button and select
the FM band.
Automatic Tuning 2
Manual Tuning
2 1 Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the FUNC-
TION button to select
the FM band.
Press the STOP ( )
button to select "MANUAL"
and then press and hold
button to automatically search the band.
Automatic Tuning 2
Press STOP ( ) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
Manual Tuning
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
When is pressed, a
preset broadcast station is
selected.
Press and hold TUNING( , )
to automatically search for active
broadcasting stations.
Briefly press TUNING( , ) to
increase or decrease the frequency
incrementally.
Automatic Tuning 1
Remote Control Unit
Main Unit
Listening to Radio
• This unit does not receive AM broadcasts. Note
HT-Q9(41~70) GB 2006.5.8 4:08 PM Page 60