Sony RDR-HXD562 - Manual (Page 94)

94
b Notes
• If your TV does not accept S-video or RGB
signals, no picture appears on the TV screen even
if you select “S Video” or “RGB.” See the
instructions supplied with your TV.
• You cannot select “RGB” when “Component
Out” above is set to “On.”
• SMARTLINK is available only when “Video” is
selected.
Line3 Input
Selects a method of inputting video signals
for the LINE 3 jack. The picture will not be
clear if this setting does not match the type of
video input signal.
b Note
Input signals are recorded in video mode when
“Video/RGB” is selected.
Line3 Output
Selects a method of outputting video signals
for the LINE 3 jack.
Pause Mode (HDD/DVDs only)
Selects the picture quality in pause mode.
Colour System
Selects the colour system when playing
VIDEO CDs (including Super VIDEO CDs).
Auto Display
Screen Saver
The screen saver image appears when you do
not use the recorder for more than 10 minutes
while an on-screen display, such as the
System Menu, is displayed on your TV
screen. The screen saver image helps prevent
your display device from becoming damaged
(ghosting).
Video/
RGB Inputs video signals or RGB
signals.
S Video Inputs S-video signals.
Video Outputs video signals.
S Video Outputs S-video signals.
Auto The picture, including
subjects that move
dynamically, is output with
no jitter. Normally select this
position.
Frame The picture, including
subjects that do not move
dynamically, is output in high
resolution.
PAL Plays a disc in PAL colour
system.
NTSC Plays a disc in NTSC colour
system.
On Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off Displays information only
when DISPLAY is pressed.
On Turns on the screen saver
function.
Off Turns off the function.