Sanyo VPC TP1000 - Manual (Page 47)

EN-46
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
„
Tap e / f to select the image that you want
to print .
„ Tap +/- to select the number that you want
to print (up to 99) .
4. Tap [ ].
5. Drag the slide bar down to the end of the menu.
Tap [Print].
6. Tap [Execute] to start printing.
7. The printing starts and the figure shown on the
right hand side appears.
„
[COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
„ If an error is detected during the connection
(i.e. a printer hardware problem) between
camera and printer, [PRINT ERROR] will be
displayed.
„ If an error is detected during the
communication (i.e. wrong setting on the camera) between camera and printer,
[ERROR] will be displayed.
„ The image printing may fail if the power to the camera is cut off.