Samsung CLX-3175FN User Manual
Page 78
78 _
Troubleshooting
Send Error
(POP3)
There is a problem in
POP3.
Configure the POP3
setting.
Send Error
(SMTP)
There is a problem in
SMTP.
Change to the available
server.
Send Error
(Wrong Config)
There is a problem on
the network interface
card.
Configure your network
interface card correctly.
[Stop Pressed]
Stop/Clear
has been
pressed during an
operation.
Try again.
Toner Empty
T
A toner cartridge has
almost reached its
estimated cartridge
life.
Press OK to toggle
the message to Stop
or Continue or Black
Only
.
W Stop X
If the black
toner cartridge
is empty,
Black Only
message does
not appear.
You can select the
option among Stop,
Continue
or Black Only
with the left/right arrow.
If you select Stop by
pressing OK on the
control panel, the
machine stops printing.
If you select Continue,
the machine keeps
printing, but the quality
cannot be guaranteed.
If you select Black Only,
the machine prints the
data in black. In this
case, the mono printing
feature is preset in the
printer properties.
When you copy, the
Black Start
button will
be activated only with
this condition.
If you do not select any,
the machine will work as
Stop
is selected.
Replace the toner
cartridge for the best
print quality when this
message appears. Using
a cartridge beyond this
stage can result in
printing quality issues.
Toner Exhausted
T
A toner cartridge has
reached its estimated
cartridge life. The
printer stops printing.
Replace the toner
cartridge. (See
Toner Low
T
Small amount of toner
is left in the cartridge.
The estimated
cartridge life of toner
is close.
Prepare a new cartridge
for replacement. You
may temporarily
increase the printing
quality by redistributing
MESSAGE
MEANING
SUGGESTED
SOLUTIONS
Transfer Belt
Error
A problem has
occurred in the
transfer belt in the
machine.
Turn the power switch
off and on. If the problem
persists, call for service.
Tray
Paper Empty
There is no paper in
the tray.
Load paper in the tray.
Tray
Paper Mismatch
The paper size
specified in the printer
properties does not
match the paper you
are loading.
Load the correct paper in
the tray.
MESSAGE
MEANING
SUGGESTED
SOLUTIONS