Sunbeam SM8310 - Manual (Page 6)

Important: Ensure that the StickMaster is
unplugged from the power outlet before
assembling or removing attachments.
To assemble your StickMaster
1. Insert the top part of the detachable shaft
into the hole on the base of the motor
housing until you hear a click. See diagram 1.
To disassemble your StickMaster
1. Press the lower button on the motor housing.
With your other hand, supporting
the detachable shaft as it comes
away from the motor housing
automatically. See diagram 2.
To use your StickMaster
1. Simply plug in your StickMaster to a 230-
240V power outlet.
2. Lower the StickMaster into food and depress
the power button at the top of the motor
housing.
OR, with your StickMaster Pro (SM8310) you
can select the optimal speed for the
processing task, by rolling the speed control
dial at the top of the motor housing.
3. To stop your StickMaster, take your finger off
the power button.
6
Using your Sunbeam StickMaster.
Diagram 1
Diagram 2
Press Eject
button to
release