Star Micronics FUTUREPRINT TSP100 - Manual (Page 21)

– 18 –
2) Non-recoverable errors
Note:
1) If a non-recoverable error occurs, turn the power OFF immediately.
2) If a non-recoverable error occurs, please consult the dealer for repairs.
3) Paper cut error
Note:
If the cutter does not return to its home position or does not perform the initial
movement, it will result in a non-recoverable error.
4) Paper detection error
Error Description
Head thermistor error
Board thermistor error
VM voltage error
VCC voltage error
EEPROM error
USB error
CPU error
RAM error
POWER Lamp
Flashes at 0.5-
second intervals
Flashes at 2-
second intervals
Off
Flashes at 1-
second intervals
Flashes at 0.25-
second intervals
Flashes at 5-
second intervals
Off
Off
ERROR Lamp
Flashes at 0.5-
second intervals
Flashes at 2-
second intervals
Flashes at 1-
second intervals
Flashes at 1-
second intervals
Flashes at 0.25-
second intervals
Flashes at 5-
second intervals
Off
On
Recovery Conditions
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Non-recoverable
Error Description
Paper cut error
POWER Lamp
Off
ERROR Lamp
Flashes at 0.125-
second intervals
Recovery Conditions
Recovered by turning the power
OFF, eliminating the cause of
the error such as jammed paper,
returning the cutter to its home
position, and turning the power
ON (see 7-3).
Error Description
Paper out error
POWER Lamp
On
ERROR Lamp
Flashes at 0.5-
second intervals
Recovery Conditions
Automatically recovered by
loading a new paper roll, then
closing the printer cover.