Print head position adjustment – SATO XL4xxe User Manual
Page 13
<
previous | home
| next
>
EZ Manual: XL4xxe
Barcode SATO International Pte Ltd
Print Head Position
Adjustment
13
Major Adjustment
Required equipment
“+” Screwdriver (JIS No.2 equivalent)
“–” Screwdriver
STEP
1 Loosen the two set screws on the adjustment plate.
2 Turn the head mounting screw.
3 Adjust the head position by moving the head adjustment
p late back or forth using the “–” screwdriver.
4 After the adjustment, tighten the set screws and the
head mounting screw.
Set Screw
Adjust Screw