SATO XL4xxe - Manual (Page 12)

< previous | home | next >
EZ Manual: XL4xxe
Barcode SATO International Pte Ltd
Print Balance
Adjustment
12
Major Adjustment
Required equipment
“+” Screwdriver (JIS No.2 equivalent)
To adjust the print head presser and to ensure consistent
print quality across labels, perform the following steps:
STEP
1 Loosen the set screw.
2 Turn the adjust screw to adjust.
3 If the print is dark at front side, turn the adjust screw
to clockwise.
4 If the print is dark at basic frame side, turn the adjust
screw to anticlockwise.
5 Finish adjust, then fix the set screw.
Adjust screw
Graduation Set Screw