Siemens C55 - Manual (Page 72)

Setup
71
C55 Tuna english, A31008-H5600-A1-3-7619 (27. March 2003, 13:01)
©
Siem
ens AG 2001
, I
:\Mob
il\L55\C
55_Tuna_2\en\en\c55_se
tup.fm
Fax/data mode using a PC
§Menu§
K
Setup
K
Connectivity
K
Fax/data mod.
K
Select a function.
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
data communication/fax communi-
cation must be available on your PC
and there must be a connection to
the phone.
Fax and data services must be ena-
bled by the service provider. Differ-
ent networks support different types
of fax/data reception; please contact
your service provider for details.
§Edit§ Set the required mode.
Rec fax/data
Your service provider can give
you a number for telephoning and a
fax/data number.
The call is signalled by a special ring-
er and the type of call (fax or data) is
displayed.
Now start the communication pro-
gram in your PC to receive the fax/
data.
Send vce/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
While the connection is being setup,
the following function is available
for two seconds:
§Voice/fx§ Switch to Send vce/fax
mode; you may now send
a fax.
Voice/fax rec
(Only if a special fax or data number
is not available).
Start the required communication
program in your PC and switch on
the function at the phone during the
call (the PC accepts the connection).
End transmission
End transmission with PC software
and/or press
B
.
L
L