P. 68), Setup, Wap profile settings – Siemens C55 User Manual
Page 69
Setup
68
C55 Tuna english, A31008-H5600-A1-3-7619 (27. March 2003, 13:01)
©
Siem
ens AG 2001
, I
:\Mob
il\L55\C
55_Tuna_2\en\en\c55_se
tup.fm
WAP profile settings
Up to 5 WAP profiles can be set (may
be barred by the service provider).
The entries may vary depending on
your service provider. To set a new
profile:
G
Select profile.
§Edit§
Open menu.
G
Select profile range and
make your settings/en-
tries field by field.
§Edit§
The entry card is dis-
played.
If necessary, check with your service
provider for details:
§Save§
The settings are stored
and the profile list is
shown.
Activate the set WAP
profile (p. 39).
Profile
name:
Enter/change name.
WAP Pa-
rameters
IP address:
Enter IP address.
Port:
Enter port number.
Homepage:
Enter homepage
(p. 37), if not set by the service
provider.
Linger time:
Time in seconds
after which a connection is to
be ended if no further entry is
made or there is no exchange
of data.
L
CSD set-
tings
(Circuit
Switched
Data)
Dial-up no.:
Enter ISP
number.
Call type:
Select ISDN or
Analogue.
Login name:
Enter login
name.
Password:
Enter password
(shown as a series of
asterisks).
GPRS
settings
(General
Packet
Radio
Service)
GPRS deactivated:
Yes/No.
(Only possible when GPRS
function is switched on, p. 67)
APN:
Enter the address of
your service provider.
Login name:
Enter login
name.
Password:
Enter password
(shown as a series of
asterisks)