SUPER MICRO Computer X8STI-3F - Manual (Page 32)

2-8
X8STi/X8STi-F/X8STi-3F/X8STi-LN4 User's Manual
Memory Support
The X8STi/X8STi-F/X8STi-3F/X8STi-LN4 supports up to 24 GB unbuffered ECC or
Non ECC DDR3 1333/1066/800 in 6 DIMM slots.
Populating these DIMM slots with sets of three memory modules of the same type
and same size (at least one module per channel) will result in interleaved memory,
which improves memory performance. (i.e., install one module each on DIMM slots
DIMM1A, DIMM2A and DIMM3A).
Channel 1 Slots
Channel 2 Slots
Channel 3 Slots
DIMM Module Population Configuration
For memory to work properly, follow the table below for memory installation:
Memory Population (UDIMM Only Routing)
DIMM
Slots per
Channel
DIMMs
Populated
per Channel
DIMM Type POR Speeds
(in MHz)
Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank)
2 1 Unbuffered DDR3
(with or without ECC)
800,1066,1333 SR, DR
2 2 Unbuffered DDR3
(with or without ECC)
800,1066, SR, DR
Population Rules: Any combination of x8 and x16 UDIMMs, with 1Gb or 2Gb DRAM density.
Memory Population (UDIMM 3 DIMMs per Channel Routing)
DIMM
Slots per
Channel
DIMMs
Populated
per Channel
DIMM Type POR Speeds
(in MHz)
Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank)
3 1 Unbuffered DDR3
(with or without ECC)
800,1066,1333 SR, DR
3 2 Unbuffered DDR3
(with or without ECC)
800,1066, SR, DR
Population Rules: Any combination of x8 UDIMMs, with 1Gb or 2Gb DRAM density.