SUPER MICRO Computer X8STI-3F - Manual (Page 15)

Chapter 1: Introduction
1-7
Motherboard Features
CPU
• Single Intel® Core™ i7 and and Intel® Xeon® 5500/3500 series processors in
an LGA1366 socket.
Memory
• Six 240-pin, DDR3 SDRAM DIMM sockets with support for unbuffered ECC or
non ECC 1333/1066/800 MHz memory.
Note: Both Unbuffered ECC and Non-ECC DIMM modules are supported
by the motherboard. Using ECC or Non-ECC memory on your motherboard
depends on the CPU installed. Please see Page 3-3 for more information
on memory support.
• Supports 3-channel memory bus
• Supports DIMM sizes of 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB
Chipset
• Intel® X58 Express Chipset
• Intel ICH10R
Expansion Slots
• One (1) (PCI-Express x16 Gen2 + PCI-Express x8 in x4) slot
• One (1) 32-bit PCI 33MHz slot (Slot 1)
Integrated Graphics
• Matrox G200ew with 8 MB Video Memory
Network Connections
• Two Intel 82574L Gigabit (10/100/1000 Mb/s) Ethernet Controllers for LAN 1
and LAN 2 ports, additional two 82574L for LAN 3 and LAN 4 ports on the
X8STi-LN4 model
• Two (2) or four (4)* RJ-45 Rear IO Panel Connectors with Link and Activity LEDs
(*Four RJ-45 ports are available on the X8STi-LN4 only)
• Single Realtek RTL8201N PHY for the Dedicated IPMI 2.0LAN for the X8STi-
F/-3F
• One (1) RJ45 Rear I/O Panel Dedicated IPMI 2.0 Connector for the X8STi-F/-
3F
• I/O Devices
SATA Connections
• Six (6) SATA ports supported by the Intel ICH10R SATA Controller
• Supports RAID 0, 1, 5, 10 under the Windows OS environment