Sony PDW-F70 - Manual (Page 30)

30
External Synchronization
Chap
te
r 2
Pr
epa
ra
tio
n
s
When the diameter of the XLR cable is too large
to loop
If the diameter of the XLR cable is so large that is difficult
to loop the cable through the ferrite core, simply pass it
through the core without looping. In this case, use a
binding strap (not supplied) to at the specified position, as
shown in the figure below.
This unit will not meet the requirements of the CISPR 22
Class B electromagnetic interference standard if ferrite
cores are not attached to XLR cables.
External Synchronization
This unit synchronizes as shown in the following table,
according to the presence or absence of signals input to the
HDSDI INPUT connector, the presence or absence of
signals input to the REF VIDEO INPUT connector, and
the setting of the V INPUT item on the HOME page of the
function menu (see page 81).
There is no external synchronization for file operations by
FAM connection (see page 78).
Note
XLR cable
Ferrite core (supplied)
120 to 150 mm
Binding strap
(not supplied)
Ferrite core
(supplied)
XLR cable
120 to 150 mm
Signal
input to
HDSDI
INPUT
connector Signal
input to
REF VIDEO
INPUT
connector V INPUT
setting External
synchronization
Yes Yes HDSDI Synchronize to
HDSDI input
SG Synchronize to REF
VIDEO input
Yes No HDSDI Synchronize to
HDSDI input
SG No external
synchronization
No Yes HDSDI Synchronize to REF
VIDEO input
SG
No No HDSDI No external
synchronization
SG
Note