Sagem myX2-2m EN - Manual (Page 47)

Security 47
Call barring
This menu allows you to block the sending or reception of certain calls.
Before you can use this service, a password will be provided by your operator when you take out your subscription.
Access to this service depends on your subscription type.
To activate call barring :
- From the Security menu, select the Call barring menu, and [Select].
- Select incoming or outgoing calls.
- Select the call type on which you want to activate call barring.
- Select:
• either All,
• or If roaming, if you are away from your home country and if roaming is available, only incoming calls will be blocked.
- Select Activation and enter password.
Fixed dialling
This menu allows you to restrict the sending of calls.
From the Security menu, select the Fixed dialling menu and [Select].
Enter PIN number 2 and [OK].
Select Activate or Deactivate and [OK].
Proceed as for any other phonebook.
By activating this function, you can send calls only to the numbers stored in this phonebook.
This phonebook is linked to the SIM card, and its size depends on the card's capacity.
Costs
This menu allows you to control the cost of your calls (*) (depending on model).
From the Security menu, select the Costs menu and [Select].
This menu enables you to check the cost of the last call you have made: you can also check the cost of all the calls made
since you have reset the durations (Menu Counters/Duration/Delete Duration)
The Delete costs menu enables you to delete the cost of the last call. You can also reset the counters, after entering your
PIN 2 code.
(*) WARNING
Depending on how the networks and the SIM cards are configured, some functions may not be available (shown by *).
251959374_myX2-2_lu_en.book Page 47 Mercredi, 30. mars 2005 11:48 11