Sagem myX2-2m EN - Manual (Page 36)

36 Sounds
Sounds
This menu allows you to customise the ring tones on your phone and to activate beep and vibrate modes.
Volume and ring tone
This menu allows you to allocate a ring tone to each type of event.
From the Sounds menu choose Ring tones menu and [Select].
Select the type of event from the list offered and [OK].
Select the ring tone from the list offered and [OK].
Adjust the volume using the down / up keys and [OK].
You can deactivate the sound by pressing the
key.
Vibrate
This menu allows you to activate the vibrate mode for calls.
From the Sounds menu choose the Vibrate menu and [Select].
Select the vibrate mode from the choices offered and [OK].
WARNING: vibrate mode is not a priority in relation to the choice of ring tones in the call groups. To make vibrate mode apply
in general, switch to Silent mode.
Silent mode
This menu allows you to switch to Silent mode.
From the Sounds menu select Silent mode and [Select].
Activate or deactivate Silent mode and [OK].
Silent mode can also be accessed via the home page by holding down the
key.
When the phone is in silent mode, the relevant icon appears on the home page.
In this mode the ring tone will not function, except for the alarm clock.
251959374_myX2-2_lu_en.book Page 36 Mercredi, 30. mars 2005 11:48 11