Sagem myX2-2m EN - Manual (Page 14)

14 Activating your phone
Installing the SIM card and installing the battery
Switch off your phone and disconnect the charger.
The SIM card is inserted beneath the phone’s battery.
Turn your phone over and slide the backcatch up.
Take off the back cover, starting from the bottom.
Take out the battery.
Slide the card along the base beneath the retaining plate, with the gold coloured
sections facing towards the phone and the cut-off corner lined up to match the
drawing on the phone.
Place the battery by first inserting the upper section into the opening.
Replace the back cover, clicking in first the upper part then the lower and pushing
the backcatch downwards into the locked position.
1
2
3
4
5
6
1
2
3
4
5
6
251959374_myX2-2_lu_en.book Page 14 Mercredi, 30. mars 2005 11:48 11