Intercom calls, A u to answer mode, Busy station callback – Samsung LCD 24Bi User Manual
Page 19: Making a call, Answering intercom calls, Voice announce mode
11
MAKING A CALL
• Dial the extension number or group number or press a Direct
Station Select D S S k e y.
• Wait for the party to answer. If you hear a brief tone burst instead
of ringback tone, the station you called is set for Voice announce
or Auto answer. Begin speaking immediately after the tone.
• Finish the call by replacing handset or press A N S / R L S k e y.
ANSWERING INTERCOM CALLS
• Lift the handset -O R- press the A N S / R L S k e y.
• To finish the call replace the handset or press the A N S / R L S
b u t t o n .
VOICE ANNOUNCE MODE
When another station calls you, your keyset will sound a brief
attention tone and you will hear the caller's announcement.
• Press A N S / R L S to turn on microphone and speak handsfree -
O R- lift the handset to reply.
• To finish the call, replace the handset or press the A N S / R L S k e y.
A U TO ANSWER MODE
When another station calls you, your keyset will sound a brief
attention tone and then automatically answer the call.
• Your microphone and speaker are turned on and you can speak
handsfree. For privacy, use the handset.
• To finish the call, replace the handset or press the A N S / R L S k e y.
BUSY STATION CALLBACK
When you call another station and receive a busy signal:
• Press the C B K key or dial 44.
• When the busy station becomes free, your keyset will ring.
• Lift the handset or press A N S / R L S to call the now idle station.
INTERCOM CALLS
»£¡÷«‚USER-
∫
ª
π
Æ 98.7.16 12:52 PM
∆
‰¿Ã¡ˆ11