Samsung HT-Q70 - Manual (Page 14)

ENG
26
OPERA
TION To stop playback, press STOP during playback.
• If pressed once, “ PRESS PLAY” is displayed and the stop position will be stored in memory.
If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
• If pressed twice, “ STOP” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE ( ) button again.
The DVD/CD function is automatically selected when Disc Skip is pushed.
Selecting a Disc in the Disc changer
To select a specific disc, press the corresponding DIRECT PLAY
(1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on the
remote control, until the required disc indicator flashes.
• If the disc selected is not loaded, the next disc is played automatically.
25
Disc Playback
2 Load a disc.
• Place a disc gently into the tray with the disc’s label
facing up.
• Depending on the content of the disc, the initial screen may appear different.
1
Press OPEN/CLOSE button to open the
disc tray.
3
Press DISC SKIP button.
• Rotate the carousel tray so you can load the third, fourth,
and fifth discs.
4 Close the compartment by pressing the
OPEN/CLOSE button again.
DVD CD
• Playback starts automatically.
Note
Q70(1~44)_XAA_ENG 2003.3.1 11:12 AM Page 28