Savin MLP26 User Manual

Page 56

Paper and Other Media

DDDD

Push the bottom plate down until
it locks into place.

EEEE

Load envelopes into the Envelope
Feeder Unit, with the print side
down and the flap on the left as
shown in the illustration.

Important

❒ Confirm that the envelope flaps

are securely folded down, and
that there is no air inside the en-
velopes.

Note

❒ Confirm that the top of the stack

is not higher than the limit mark
on the side guides.

❒ Confirm that the envelopes fit

under the side guides.

❒ Do not push the stack of enve-

lopes with too much force.

FFFF

While pinching the side guides,
slide them along the edge of the
envelope stack.

GGGG

While pinching the rear guide,
slide it along the edge of the enve-
lope stack.

HHHH

While lifting the front of the tray,
place it into the printer. Then
slide it until it stops.

Important

❒ Do not slide the paper tray in

with force. If you do, the front
and side guides might move.

ZDDP360E

ZDDP380E

ZGDY370E

ZGDY390E